Tuesday, February 18, 2014

Download From Cal

May 2012:

After moving into my place in Louisiana and setting up the garage, it was time to download my trailer and begin disassembly.


The garage took some work when I moved in, but ended up being pretty ideal.  This is where every part, nut, bolt, and fastener will receive attention.   


Collecting Some Great Parts

For some reason every time I start in on figuring out the details for one specific area of the car, research, my taste, and creative ideas end up leading me to the most rare and expensive option I could possibly want.


This is a beautifully restored example of a Blaupunkt Koblenz de Luxe radio from Radio Museum, a small vintage radio restoration shop in Spain.  I had to have it because the dimensions and design match that of the radio which belongs in my car, but it's an upgraded version which went in more expensive European cars of the same era (BMW, Alfa Romeo, etc).  This one with stainless steal knobs, lots of chrome touches and black buttons will go perfectly with my plans for the interior.  The shop owner in Spain restored the electrics inside and fitted an MP3 jack to the back.  Now my digital music will be able to play through this fantastic old radio!!

BUMPERS:  I've always liked the style of Type 3 bumpers fitted with Flat 4 Over-Rider kits, but felt the rubber bumper guards made things look a bit disproportioned.  It's too much bumper for such a little car.  I wanted them to look more like the Beetle kind, which are all chrome, well proportioned, and befitting of the car.  So,,, this is what they looked like before I set about customizing them further.  Remember what I said about expensive ideas?..



I sourced set of NOS vertical guards and had them modified to suit the overriders, eliminating the cop-car-looking rubber bumpers.




After a re-chrome everything came out looking pretty slick!!

Transaxle Complete!!

Spring 2012: Thanks to Jim at DerTransaxle in Orange, CA my transaxle is nearly complete.  Since I wanted Jim to handle this part of the project, it was best to build it prior to trailering the car to Louisiana where most of the project will take place.  Especially since I have an extra rear end to use as a roller.




There's some nice custom touches here:

  • Super-Diff differential
  • Shortened type 3 axles to make room for custom off-set wheels (decided to keep the stabilizer bar mounting loops for Type 3 authenticity).
  • 4th gear from a VW Bus (taller gear for better cruising RPM/Freeway Flyer). 
  • Gloss black powder coated finish.
  • CSP billet disk brake conversion caliper brackets.
  • ECS Tuning alloy drain and fill plugs.
  • All stainless hardware, and seamless axle boots.   

Christmas 2012

Conveniently vacations back home put me in So Cal near most of the major vintage VW parts dealers.  During my trip for Christmas 2012 I was able to make stops at West Coast Metric, ISP West, a few choice junk yards, and a specialty shop or two.  The car will get all fresh rubber (windows, wings, doors, lids, every grommet in production, fender beading, rear quarter intake seals, molding seals, light seals, etc), anything that isn't reproduced gets a scrub and refit.


Also picked up a high quality item from Scott Stuart of PeddleWerks in San Bernardino, who was kind enough to take my order from Afghanistan.


Custom peddle box:  Clutch roller conversion, reinforced throttle slide, all smoothed out/filled and chrome plated, with a billet gas peddle.  I love how the billet peddle is the same style and dimensions as the original.

Sunday, February 16, 2014

So, the pic in my last post was taken back in 2005.  Below are photos from Christmas 2012 when the car was first pulled from moth balls.  Work began quickly, as I tore into the front and rear suspensions to determine what the final geometry and ride height would look like in order to accommodate the Porsche 356 A model replica wheels I planned to run.





Getting the car out after 7 years was FANTASTIC!!!  It of course didn't run, but my plans for this project have been in R&D every since I left home, so you can imagine my excitement.  

With plans for a ground up, nut-and-bolt restoration, I bought a 97 Chevy Tahoe and a 16x8' enclosed car trailer for transportation to and from the body shop, and eventually, shows and events.


Getting You Up To Speed


This is the status of the car just before I joined the Army.  After which, its wheels were pulled and the car was set on blocks in my Mom and Dad's backyard where it sat under tarps for over 7 years.  A safe corner in the back yard and new tarps every season (thanks Mom & Pop!!) preserved the car until I could get back to it.

The Restoration Begins

A long awaited restoration of my 67 VW Fastback has finally begun!  Thanks to my assignment in Louisiana in 2012 I finally have the space, means, and most importantly the time to begin a ground up resto.  I started the project back in June of 2012 so I've some catching up to do on all the build details.


  

The car joined my family back in 2002 shortly after I wrecked my first car, a 66 VW Fastback.  A front end wreck destroyed the first project, but shortly after I managed to find this engineless, incomplete, but solid car in Freemont, CA.  At the time I was 17, so my amazingly supportive folks put a trailer hitch on the family van, rented a U-Haul trailer, and made the 6.5 hour trek from Wrightwood to Northern Cal.  Since the whole drive train and rear suspension were salvageable from the first car, I made one car of the two which propelled me through my remaining years of high school, and first year of college.