Wednesday, March 26, 2014

Work Completed by the Howard Brothers and Crew at Deluxe Customs

Fall of 2013:

All along I've wanted the quality of this restoration to be show and magazine article worthy.  All the details I'd planned and rare parts I've collected from all over the world (thanks internet!!) would mean nothing if paint and body wasn't exquisite, and reassembly wasn't done in painstaking detail.  As I mentioned, the nearest body and paint restoration talent with a reputation that met my planned standards was in Tempe, AZ.  So, the car was towed over 2,000 miles and dropped off for 6 months of being busted down to bare metal and brought back to life in true Blue fashion!!


Speaker holes in rear luggage tray were a no-go.  Wanted the panel to have a stock appearance when viewed from an open trunk.

 f



All patched up!


At some time in the cars history a huge wonky hole was drilled in the fender for an aftermarket antenna.  Here it is being returned to stock form, eventually to be fitted with a NOS Hirschman Red Tip.  


Since I'm too tall to fit in the car with stock T-3 seats, my plan was to get some low backs and seat rails from a 64 Karmann Ghia and have the pan modded fit them.  Gets me an addition 4.5 inches or so of head room,, everyone else probably won't be able to see over the steering wheel....


Here's the clean installation work on the seat rails.



Body work and rust removal begins.  Luckily, the car had just a few trouble spots, pretty solid all around.  




Filling engine compartment insulation holes for a sanitary color matched compartment.






Several posts ago I wrote about the Blaupunkt radio and custom 356 Tach set up I'd planned.  This is Matt making it happen with a custom made, heavy gauge steal dashboard extension, which will be color matched to the dash, and support the big Tach below.  It turned out just how I'd hoped.
   




Tuesday, March 4, 2014

Off to Paint. FINALLY!!!

Summer 2013:

Last June was a big month for the project.  I've been on the waiting list at Deluxe Customs of Tempe, AZ for over a year.  June was the month I planned to drop the car off for a full body and paint restoration.  I'd been collecting all the required seals, hardware, and rare little parts to take along with the car for the past two years.  Disassembly, suspension configuration, and other pre-paint details took a year of evenings and weekends, and now it was finally time for the car to be stripped to bare steal, and redone in true, top to bottom fashion.  Unfortunately where I live in south western Louisiana, there's no VW restoration talent anywhere to be found.  Research on who could do a truly show worthy job on this particular car led me to the nearest option, Deluxe Customs.  Yeah,,, I trailered the car all the way to Tempe...



Brent "Bert" Bachman and I loading up in LA.








TEXAS
Luckily my folks planned a visit just prior to the road trip and we ended up making the journey a family affair.  Kind of appropriate seeing as how the cars been around since I was a kid.  


We were a little road weary by West Texas,, started singing Marty Robbins about 2 hours outside of   El Paso and figured we ought to try and find Rosa's Cantina...  Sure enough, it exists!!  You can hit Mexican soil with a stone from the parking lot.  I wouldn't plan to go here alone, but if you've got back up its worth a stop to have a cold beer and pick up a kick ass T-Shirt.  




AZ, Almost there!


Arrival at Deluxe
Matt Howard (owner) and I spent over two hours walking around the car ironing out all the details.  By the end of it, we had a couple of pages of notes, Matt had drawn all over the car with a permanent marker, all my requests were recorded, and I was confident that the journey would end up being worth it in the end.  The car was in good hands. 


 As a testament to the talent and abilities of the guys working in this shop, look at what was being worked on when I dropped the VW off!!  That's a 1958 Mercedes SL drop top, which had major rust damage and was to be finished in gloss black.  The rest of the place was wall to wall Porsche 356's in various stages of rejuvenation. Crazy beautiful work all around!!









Wheels!!

Spring 2013:

Another piece of the project with lots of R&D involved is the custom wheel and brake setup.  I wanted to run something period correct, something Porsche-VW appropriate, but also different, unique, and more interesting than what's found on a majority of custom VWs.  Tough criteria I know, but I thought it achievable by customizing a set of original Porsche 356 steelies to one-off sizes.  My original idea was to stretch the faces and customize the off-sets in 16" rims.  I pictured it as a subtle, but very cool modification you'd have to look twice at to notice.  In my search, I stumbled upon a much more practical way of achieving exactly what I was after.  Below are a one-off set of Porsche 356A Model Alloy Replicas.  16x6" w/ a 3.5" offset for the back and 16x4.5 w/ a 1.5" offset for the front.





The plan is to run them without hubcaps over a 4 wheel, CSP, 5x205 disc brake conversion set up.  This will give the car an Outlaw theme and make it look as though it's still running drum brakes.  You won't be able to tell that its been converted to disc until you're standing right next to it looking through the rim.  Below are some pics of a trial suspension set up.  Picture the rear end 1" lower and the front end 2.5" lower, which is what I ended up happy with.



    


One of the last items to be done on the car after all the adjustments, alignment, and test rides have are complete, will be to paint the hubs in high gloss black.   Black lug nuts, on a polished rim, over black hubs should look pretty slick!!

Wednesday, February 26, 2014

Some Part Restorations

Fresh air vent drain pans:

The car has little slats in the body just in front of the windshield to let fresh air into the cab.  The drain pans underneath are notorious for rusting completely away, luckily mine were salvageable.


 Before


Stripped


Painted


Reassembled with new seals.




Finished


Wiper Motor:
This thing was looking pretty rough.





Even though no one will ever see it again, it still had to be restored.




Tuesday, February 25, 2014

Interior Gem

Spring 2013:

I'll try to make a long story short.  I wanted to hang a tachometer beneath the planned radio dashboard extension, but didn't want an off-the-shelf eyesore which wouldn't fit the interior.  It needed to be something period correct, that suited the car, and preferably was quite large.  After scouring the Internet for after market options with complete disappointment, I decided to go custom.  Of all the instrument panel intended Tachs I looked at from 50's and 60's cars my favorite was a Veigel Tach out of a 1952 Porsche 356.  Though it's intended to be a cable driven instrument, there was a rare electronic conversion kit made for a brief period of time.  So, my intent was to locate and buy this rare Tach, restore it, and do an electronic conversion.  Despite how expensive this plan was, I was absolutely determined.  Luckily, one of the first places I called to try and locate one (after coming up empty handed on the web) was North Hollywood Speedometer, a European classic instrument restoration shop.  After describing what I was after, the German old timer on the phone said he could build a handmade replica for less than the cost of an old dilapidated original!!!  Though this wasn't exactly cheap either, it would be hand made, and have modern electrics.   Jackpot!!

This is the model.



 After having the gauge made, I turned to figuring out a mounting system.  It would have to be custom; also hand made.  I drew up some sketches and contacted Chris Coddington who had in the mean time been working on a set of custom wheels for the project (which I'll post about later).  Chris pointed me at a machinest by the name of Mike Burgess, near Orange, CA.  Mike is an independent machinist who takes odd jobs out of his garage when his interest is peaked.  After meeting with Mike and going over some details, I knew he was the man for the job.    

First Sketch


What Mike created after tweaking my original plans (BRILLIANT!!).









 All painted up, it looks awesome!!  Mike,, if you ever have a look here, thanks for an amazing piece!!  This thing is sure to be the subject of many conversations.  Thanks again!!